ESP32

From regional-training
Revision as of 12:02, 28 April 2023 by Ralph (talk | contribs) (Created page with "=comparisons= none * https://maker.pro/esp8266/tutorial/a-comparison-of-the-new-esp32-s2-to-the-esp32 =ESP32S= * https://www.espressif.com/en/support/documents/technical-documents * https://www.amazon.com.au/ESP-WROOM-32-Development-Bluetooth-Ultra-Low-Consumption/dp/B07Z1RH9TR/ref=sr_1_7?dchild=1&keywords=esp32&qid=1630275723&s=electronics&sr=1-7 * https://www.amazon.com.au/Development-Supports-ESP32-CAM-Intelligent-Equipment/dp/B08CDCSQ...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

comparisons

ESP32S

ESP8266 NodeMCU

Pinout of ESP-01

ESP-01 module pinout

The pinout is as follows for the common ESP-01 module:

  1. GND, Ground (0 V)
  2. GPIO 2, General-purpose input/output No. 2
  3. GPIO 0, General-purpose input/output No. 0
  4. RX, Receive data in, also GPIO3
  5. VCC, Voltage (+3.3 V; can handle up to 3.6 V)
  6. RST, Reset
  7. CH_PD, Chip power-down
  8. TX, Transmit data out, also GPIO1
ESP8266 Die shot


audio

ESP CVE

categories