Pico Dev: Difference between revisions
(→picos) |
|||
| (13 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
[[image:pico- | =specifications= | ||
The pico provides<ref>specifications https://www.raspberrypi.com/documentation/microcontrollers/raspberry-pi-pico.html</ref> | |||
* dual-core ARM RP2040 dual core Arm Cortex M0+ SOIC. | |||
* 264kB of SRAM | |||
* 2MB of on-board flash memory | |||
* USB 1.1 with device and host support | |||
* Low-power sleep and dormant modes | |||
* 26 × multi-function GPIO pins | |||
* 2 × SPI | |||
* 2 x I2C | |||
* 2 x UART | |||
* 3 x 12-bit ADC | |||
* 16 × controllable PWM channels | |||
* Accurate clock and timer on-chip | |||
* temperature sensor | |||
* accelerated floating-point libraries on chip | |||
* 8 × Programmable I/O (PIO) state machines for custom peripherals support | |||
* Drag-and-drop programming using mass storage over USB | |||
=picos= | |||
[[image:pico-WH.png]] | |||
* '''pico''' https://core-electronics.com.au/raspberry-pi-pico-soldered-headers.html (no Wifi) | |||
* '''pico W''' https://core-electronics.com.au/raspberry-pi-pico-w-with-soldered-male-headers.html | |||
* '''headerless pico W''' https://core-electronics.com.au/raspberry-pi-pico-w-wireless-wifi.html | |||
* https://core-electronics.com.au/piicodev-adapter-for-raspberry-pi.html | * https://core-electronics.com.au/piicodev-adapter-for-raspberry-pi.html | ||
** https://core-electronics.com.au/piicodev-transceiver-915mhz.html?mc_cid=2998a2e466&mc_eid=f7152c2b59 | ** https://core-electronics.com.au/piicodev-transceiver-915mhz.html?mc_cid=2998a2e466&mc_eid=f7152c2b59 | ||
** https://core-electronics.com.au/piicodev-expansion-board-for-raspberry-pi-pico.html | ** https://core-electronics.com.au/piicodev-expansion-board-for-raspberry-pi-pico.html | ||
** https://core-electronics.com.au/piicodev-cable-100mm.html | ** https://core-electronics.com.au/piicodev-cable-100mm.html | ||
* https://core-electronics.com.au/piicodev-adapter-for-micro-bit.html | * https://core-electronics.com.au/piicodev-adapter-for-micro-bit.html | ||
[[image:pico-radio.png]] | |||
[[image:pico- | |||
=references= | |||
<references/> | |||
=categories= | |||
[[category:Pico]] | [[category:Pico]] | ||
[[category:public]] | [[category:public]] | ||
[[category:Development Boards]] | |||
[[category:Hardware]] | |||
Latest revision as of 13:10, 28 April 2023
specifications
The pico provides[1]
- dual-core ARM RP2040 dual core Arm Cortex M0+ SOIC.
- 264kB of SRAM
- 2MB of on-board flash memory
- USB 1.1 with device and host support
- Low-power sleep and dormant modes
- 26 × multi-function GPIO pins
- 2 × SPI
- 2 x I2C
- 2 x UART
- 3 x 12-bit ADC
- 16 × controllable PWM channels
- Accurate clock and timer on-chip
- temperature sensor
- accelerated floating-point libraries on chip
- 8 × Programmable I/O (PIO) state machines for custom peripherals support
- Drag-and-drop programming using mass storage over USB
picos
- pico https://core-electronics.com.au/raspberry-pi-pico-soldered-headers.html (no Wifi)
- pico W https://core-electronics.com.au/raspberry-pi-pico-w-with-soldered-male-headers.html
- headerless pico W https://core-electronics.com.au/raspberry-pi-pico-w-wireless-wifi.html
- https://core-electronics.com.au/piicodev-adapter-for-raspberry-pi.html
- https://core-electronics.com.au/piicodev-adapter-for-micro-bit.html
