AdaFruit USB TTL dongle: Difference between revisions
No edit summary |
No edit summary |
||
| Line 4: | Line 4: | ||
! lead !! signal !! pi GPIO pin !! pi signal | ! lead !! signal !! pi GPIO pin !! pi signal | ||
|+ | |+ | ||
| red || +5 | | red || +5 Volt || 2 || 5 Volt | ||
|+ | |+ | ||
| black || Ground || 6 || GND | | black || Ground || 6 || GND | ||
| Line 10: | Line 10: | ||
| white || TxD || 8 || GPIO14 | | white || TxD || 8 || GPIO14 | ||
|+ | |+ | ||
| green || RxD || 10 || | | green || RxD || 10 || GPIO15 | ||
|} | |} | ||
Revision as of 14:27, 18 May 2023
The new adafruit USB TTL dongle uses Silicon Labs CP210x
| lead | signal | pi GPIO pin | pi signal |
|---|---|---|---|
| red | +5 Volt | 2 | 5 Volt |
| black | Ground | 6 | GND |
| white | TxD | 8 | GPIO14 |
| green | RxD | 10 | GPIO15 |
