Repurposing computer equipment
Repurposing and recycling e-waste is good for the planet, and the pocket.
computers
I have a standard procedure when receiving computers that are to be repurposed e.g. for family or school etc.
Before assigning the machines to people I perform the following:
- grab my trusty live boot linux [1] thumb drive and plug into the high-speed USB port.
- alter the BIOS / EFI settings to temporarily disable Secure Boot [note 1]
- boot from the live Thumb Drive [note 2]
- install lz4 a block compression algorithm that I use as it will unzip to the last errorneous block if the archive is corrupted.
sudo apt update sudo apt install lz4
- plug in a large external USB drive.[note 3]
- identify the computer disks with
lsblk
- map the drive partitions to text file for later use
sudo sfdisk -L > /media/user/transfer-disk/2025-09-19-hostname-fdisk.txt
- (option) backup the computer disk drive images e.g. NVME/sdcard disk [note 4]
dd if=/dev/mmcblk0 bs=512 | lz4 > /media/user/transfer-disk/2025-09-19-hostname.lz4
- (option) backup hard disks drives e.g.
dd if=/dev/sda bs=512 | lz4 > /media/user/transfer-disk/2025-09-19-sda.lz4
- (option) alternatively backup partitions such as the boot/efi, os e.g. [note 5]
dd if=/dev/sda1 bs=512 | lz4 > /media/user/transfer-disk/2025-09-19-sda1.lz4 dd if=/dev/sda2 bs=512 | lz4 > /media/user/transfer-disk/2025-09-19-sda2.lz4 dd if=/dev/sda3 bs=512 | lz4 > /media/user/transfer-disk/2025-09-19-sda3.lz4
- Now to monitor installed sensors as per Linux sensor display [2]
apt install lm-sensors
- detect sensors
sensors-detect
- then run while testing in a spare cli terminal
for (( ; ; )) do sensors; sleep 30; done
The heavy testing can be performed from another cli terminal. My favourite is to install the phorenix test suite [3]
- install the phoronix test suite
wget https://phoronix-test-suite.com/releases/repo/pts.debian/files/phoronix-test-suite_10.8.3_all.deb sudo dpkg -i phoronix*.deb sudo apt-get install -f
- install hackbench tests
https://dev.arising.com.au/dev/Phoronix_test_suite#:~:text=phoronix%2Dtest%2Dsuite%20install%20hackbench
- run the hackbench
phoronix-test-suite run hackbench
- run the lm-
Happy testing, There are other
preparing a live-boot thumb drive
A live boot [4] thumb drive can be constructed via:
- downloaded e.g. lubuntu [5] from https://ubuntu.com/download/desktop
and written to a thumb drive with dd
dd if=lubuntu.img bs=512M of=/dev/<thumb-drive-device> status=progress oflags=sync
or written with Rufus [6] if running from Windows.
See the references for instructions.
recent test results
I recently purchased a re-purposed laptop and it's been a cause of trouble and has been returned to the vendor for repair / replacement and it seems they sent the same unit back with the same failure mode still happening, despite previously explaining how I tested it and the two failure modes.
The symptoms are intermittent:
- re-boots when the laptop is just sitting there, and
- mouse, keyboard lock-ups where absolutely nothing can be done except hold down the ACPI power button for a very long time to force a reset / reboot.
Here is a media:dell-latitude-5420.mov [7] of the lockup failure mode - see my frustration at having to go through the process of contacting the vendor again for a return via RMA. [note 6]
notes
- ↑ On DELL F2 and Intel NUC holding down F2 during boot takes you to the BIOS. F10 on NUC and F12 on DELL takes you to the boot menu.
- ↑ I have PXE boot working in my laboratory and will be able to launch live images from there instead of media boot. My collection of images are not quite there yet and in this case PXE network booting would need to be enabled in the laptops.
- ↑ I prefer an ext4 formatted NVME disk caddy I purchased from Ugren and a 2 TB NVME M.2 disk for performance and size.
- ↑ Some computers such as Chrome book, DELL and others run M.2 NVME as their main drive and these appear as mmc devices uinder Linux.
- ↑ Backing up the whole disk is easier to use for restoration but slower of course. If you have plenty of storage a complete image makes sense. I store my backups in a NAS and I have 56T Bytes of capacity (or I used to)
- ↑ I contacted the vendor this morning and they said they will ship a replacement as soon as they receive notification that the other unit RMA has been received by the LPO. I sent a photograph of the LPO receipt / tracking number via my iPhone and I get back to the office and login on their website and my replacement order has been lodged awaiting dispatch. You can't fault their customer relations.
I am pleased to announce that the Brisbane based vendor https://www.australiancomputertraders.com.au/ has good warranty and customer service. It is worth considering purchases of 2nd hand equipment when it is not too old and when it comes with warranty.
references
- ↑ download ubuntu https://ubuntu.com/download/desktop
- ↑ Linux sensor display
- ↑ phorenix test suite
- ↑ live boot https://www.cyberciti.biz/faq/creating-a-bootable-ubuntu-usb-stick-on-a-debian-linux/
- ↑ ubuntu https://ubuntu.com/download/desktop
- ↑ Rufus https://rufus.ie/en/
- ↑ the grip mode of failure media:dell-latitude-5420.mov